Click image to view full size image
| Model No. | HTII-5L | ||
| Max.Product Volume(L) | 5L | Max.Die of Diameter(mm) | 145 |
| Dry cycle(pc/h) | 700*2 | Die heat capacity(KW) | 2.5 |
| Screw Diameter(mm) | 70 | No. of heating zone | 3 |
| Screw L/D ratio (L/D) | 25 | Central distance of bi-head(mm) | 160,180 |
| Screw drive power(KW) | 22 | Max. Die Diameter(bi-head)(mm) | 85 |
| Screw heatingcapacity(3ΦKW) | 6.2~8.2 | No. of heating zone | 5 |
| No. of heating zone | 3 | Heating capacity(KW) | 2.88 |
| Output of HDPE(kg/h) | 70 | Blowing pressure(Mpa) | 0.6 |
| Oil pump drive power(KW) | 7.5 | Air volume(M3/min) | 0.4 |
| Clamping force (KN) | 60 | Cooling water pressure(Mpa) | 0.2~0.3 |
| Mold Stroke(mm) | 148~508 | Water consumption(L/min) | 60 |
| Max.Size of Mold(W*H) (mm) | 370*390 | Size of machine(L*W*H) (m) | 3.4*2.3*2.7 |
| Capacity(L) | Weight of machine(TON) | 8.5 |
Double Station Blow Moulding Machine
